2004/02/05 - SANITARY - SAN - Other

Home Browse Search

POWTS OWNER'S MANUAL at MANAGEMENT PLAN Page_Z_of�J__ FILE INFORMATION SYSTEM SPECIFICATIONS Owner y.Ep�� Septic Tank Capacity C(> ) gal ❑ NA ,41VPermit# Septic Tank Manufacturer ( �IES'F1C 11 NA DESIGN PARAMETERS Effluent Filter Manufacturer Z,q 6F, L ❑ NA Number of Bedrooms �� a NA, Effluent Filter Model A /00 ❑ NA Number of Commercial Units IV NA Pump Tank Capacity � 6) gal ❑ NA Estimated flow (average) gal/day Pump Tank Manufacturer ',[STP' ❑ NA Design flow (peak), (Estimated X 1.5) SL? gal/day Pump Manufacturer Z ❑ NA Soil Application Rate o gal/day/ft' Pump Model ❑ NA Influent/Effluent Quality Monthly average* Pretreatment Unit A-NA Fats, Oil & Grease (FOG) 530 mg/L ❑ Sand/Gravel Filter ❑ Peat Filter Biochemical Oxygen Demand (BODS) 5220 mg/L ❑ Mechanical Aeration ❑ Wetland Total Suspended Solids (TSS) 5150 mg/L ❑ Disinfection ❑ Other: Manufacturer Pretreated Effluent Quality X NA Monthly average** Dispersal Cell(s) Biochemical Oxygen Demand (BODS) 530 mg/L ❑ In-ground (gravity) ❑ in-ground (pressurized) Total Suspended Solids (TSS) 530 Eng/L ❑ At-grade 14'Mound Fecal Coliform (geometric mean) 1 510' cfu/I 00m 1 I00 ❑ Drip-line ❑ Other: Maximum Effluent Particle Size % Inch diameter * Values typical for domestic (non-commercial)wastewater and septic tank effluent. ** Values typical for pretreated wastewater. MAINTENANCE SCHEDULE Service Event Service Frequency Inspect condition of tank(s) At least once every ❑ months 19 year(s) (Maximum 3 yrs.) Pump out contents of tank(s) When combined sludge and scum equals one-third (tk) of tank volume Inspect dispersal cell(s) At least once every `� ❑ months W year(s) (Maximum 3 yrs.) Clean effluent filter At least once every 3 ❑ months UY year(s)c,R 4s7 1Vrr_-L)EU Inspect pump, pump controls ex:alarm At least once every j ❑ months J4 year(s) ❑ NA Flush laterals and pressure test At least once every ❑ months ❑ year(s) ❑ NA A Other: At least once every ❑ months ❑ year(s) ❑ NA Other: At least once every ❑ months ❑ year(s) ❑ NA MAINTENANCE INSTRUCTIONS Inspections of tanks and dispersal cells shall be made by an individual carrying one of the following licenses or certifications: Master Plumber; Master Plumber Restricted Sewer, POWTS Inspector; POWTS Maintalner, Septage Servicing Operator. Tank Inspections must Include a visual Inspection of the tank(s) to Identify any missing or broken hardware, Identify any cracks or leaks, measure the volume of combined sludge and scum and to check for any back up or ponding of effluent on the ground surface. The dispersal cell(s) shall be visually Inspected to check the effluent levels in the observation pipes and to check for any ponding of effluent on the ground surface. The ponding of effluent on the ground surface may Indicate a failing condition and requires the immediate notification of the local regulatory authority. When the combined accumulation of sludge and scum In any tank equals one-third (Ys) or more of the tank volume, the entire contents of the tank shall be removed by a 5eptage Servicing Operator and disposed of in accordance with ch. NR 113, Wisconsin Administrative Code. The servicing of effluent filters, mechanical or pressurized POWTS components, pretreatement components, and any other 1 - maintenance or monitoring at intervals of 12 months or less shall be performed by a certified POWTS Maintainer. :1. A service report shall be provided to the local regulatory authority within 10 days of completion of any service event. STARTUP AND OPERATION For new construction, prior to use of the POWTS check treatment tank(s) for the presence of painting products or other chemicals that may impede the treatment process and/or damage the dispersal cell(s). If high concentrations are detected have the contents 'F 4.0 tnnlr(0 rommipri by 7 tpntnap vontirIn0 nnarntnr nrior in iICP