2011/05/20 - SANITARY - SAN - Other

Home Browse Search

WADE A RUFSHOLM Page 2 5/132011 • The gravelless system components must be installed in accordance with the manufacturer's printed instructions, the plan approval,and COMM 83 system sizing criteria. If there is a conflict between the manufacturer's instructions and the plan approval,the plan approval and code requirements will take precedence. • Care must be taken to preserve the bench mark during construction. • The designer proposes to install an outlet filter to achieve the requirement of wastewater particle size. Access to the filter for cleaning must be provided per ss. Comm 84.25 (7)and(8),Wis.Adm. Code product approval conditions. Maintenance information must be given to the owner of the tank explaining that periodic cleaning of the filter is required.The outlet filter shall be installed per product approval stipulations. Reminder • Materials shall conform to the requirements of COMM 84. Comm 84.10.No fixture,appliance,appurtenance, material,device or product may be sold for use in a plumbing system or may be installed in a plumbing system, unless it is of a type conforming to the standards or specifications of chs. Comm 82 and 83 and this chapter and ch. 145, Stats. • Surface water drainage shall be diverted away from the system area. • The existing POWTS must be properly abandoned per s. Comm 83.33 Wis.Adm.Code. • Insulate building sewer per COMM 82.30(11)(c). A copy of the approved plans,specifications and this letter shall be on-site during construction and open to inspection by authorized representatives of the Department,which may include local inspectors. All permits required by the state or the local municipality shall be obtained prior to commencement of construction/installation/operation. In granting this approval the Division of Safety&Buildings reserves the right to require changes or additions should conditions arise making them necessary for code compliance.As per state stats 101.12(2),nothing in this review shall relieve the designer of the responsibility for designing a safe building,structure,or component. Inquiries concerning this correspondence may be made to me at the telephone number listed below, or at the address on this letterhead. The above left addressee shall provide a copy of this letter and the POWTS management plan to the owner and any others who are responsible for the installation,operation or maintenance of the POWTS. Sincerely, Fee Required$ 325.00 ��`� Fee Received$ 325.00 / Balance Due $ 0.00 Patricia andorf l— POWTS Plan Revie ,Integrated Services WiSMART code:7633 (715)634-7810, Fax: (715)634-5150,M-fr 8:00-4:45 pat.shandorf@wisconsin.gov cc: Carl J Lippert,Wastewater Specialist,(715)634-3484 Notice: Starting July 1,2009, no person or entity may engage or offer to engage in construction business in Wisconsin unless they hold a Building Contractor Registration,or equivalent, issued by the Safety and Buildings Division of the Wisconsin Department of Commerce. "Construction business"means a trade that installs, alters or repairs any building element, component, material or device that is regulated under the commercial building code, chs. Comm 60 to 66, the uniform dwelling code, chs. Comm 20 to 25, the electrical code, ch. Comm 16, the plumbing code, chs. Comm 81 to 87, or the public swimming pools and water attractions code, ch. Comm 90. The term does not include the delivery of building supplies or materials, or the manufacture of a building product not on the building site. For further information,go to our website:www.commerce.wi.Qov/SB/SB-BuildinizContractorProaram.html