2005/02/07 - SANITARY - SAN - Other

Home Browse Search

POWTS OWNER'S MANUAL 81 MANAGEMENT PLAN Page Lofd FILE INFORMATION SYSTEM SPECIFICATIONS Owner ,41qr Septic Tank Capacity gal ❑ NA Permit# Septic Tank Manufacturer ❑ NA DESIGN PARAMETERS Effluent Filter Manufacturer A13 L-, ❑ NA Number of Bedrooms ❑ NA. Effluent Filter Model ❑ NA Number of Commercial Units Pump Tank Capacity gal ❑ NA Estimated flow (average) �� gal/day Pump Tank Manufacturer ❑ NA fc);�y=f�'fL Design flow (peak), (Estimated x 1.5) gal/day Pump Manufacturer zi��L�� ❑ NA Soil Application Rate /,0 gal/day/ft' Pump Model 5 ❑ NA Influent/Effluent Quality Monthly average* Pretreatment Unit PrNA Fats, Oil at Grease (FOG) 530 mg/L ❑ Sand/Gravel Filter ❑ Peat Filter Biochemical Oxygen Demand (BODS) 5220 mg/L ❑ Mechanical Aeration ❑ Wetland Total Suspended Solids (TSS) 5150 mg/l. ❑ Disinfection ❑ Other: Pretreated Effluent Quality A Monthly average** Manufacturer Dispersal Cell(s) Biochemical Oxygen Demand (BODS) 530 mg/L ❑ In-ground (gravity) ❑ In-ground (pressurized) Total Suspended Solids (TSS) 530 rng/L ❑ At-grade X Mound Fecal Coliform (geometric mean) 510' cru/100mI 1 ❑ Drip-line ❑ Other: Maximum Effluent Particle Size % inch diameter * Values typical for dontesdc (non-commercial)wastewater and septic tank effluent. ** Values typical for pretreated wastewater. MAINTENANCE SCHEDULE Service Event Service Frequency Inspect condition of tank(s) At least once every C1 months (Maximum 3 yrs.) s Pump out contents of tank(s) When combined,sludge and scum equals one-third (Ys) of tank volume Inspect dispersal cell(s) At least once every ❑ months 0(years) (Maximum 3 yrs.) Clean effluent.filter At least once every ❑ months Pr year(s) �-,,f 15 ///Em'C'o Inspect pump, pump controls ez:alarm At least once every j ❑ months X year(s) ❑ NA Flush laterals and pressure test At least once every ❑ months ❑ year(s) ❑ NA .s' /tfG-rOCO other: At least once every ❑ months ❑ year(s) ❑ NA Other: At least once every ❑ months ❑ year(s) ❑ NA MAINTENANCE INSTRUCTIONS Inspections of tanks and dispersal cells shall be made by an individual carrying one of the following licenses or certifications: Master Plumber, Master Plumber Restricted Sewer, POWTS Inspector, POWTS Maintainer; Septage Servicing Operator. Tank inspections must Include a visual Inspection of the tank(s) to identify any missing or broken hardware, Identify any cracks or leaks, measure the volume of combined sludge and scum and to check for any back up or ponding of effluent on the ground surface. The dispersal cell(s) shall be visually inspected to check the effluent levels In the observation pipes and to check for any ponding of effluent on the ground surface. The ponding of effluent on the ground surface may Indicate a failing condition and requires the immediate notification of the local regulatory authority. When the combined accumulation of sludge and scum in any tank equals one-third (Ys) or more of the tank volume, the entire contents of the tank shall be removed by a Septage Servicing Operator and disposed of in accordance with ch. NR 113, Wisconsin Administrative Code. The servicing of effluent filters, mechanical or pressurized POWTS components, pretreatensent components, and any other maintenance or monitoring at intervals of 12 months or less shall be performed by a certified POWTS Maintainer. A service report shall be provided to the local regulatory authority within 10 days of completion of any service event. START UP AND OPERATION For new construction, prior to use of the POWTS check treatment tanks) for the presence of painting products or other chemicals that may Impede the treatment process and/or damage the dispersal cell(s). If high concentrations are detected have the contents ,f Lo t.nWc) romnupd by -3 conraoo condrina nnarafnr nrinr fn fico