Laserfiche WebLink
INSTRUCTIONS <br /> L A sanitary permit is valid for two(2)years. <br /> 2. Your sanitary permit may be renewed before the expiration date,and at a time of renewal any new criteria in the <br /> Wisconsin Administrative Code will be applicable. <br /> 3. All revisions to this permit must be approved by the permit issuing authority. <br /> 4. Changes in ownership or plumber requires a Sanitary Permit Transfer/Renewal Form(SBD-6399)to be submitted to the <br /> county prior to installation <br /> 5. Onsite sewage systems must be properly maintained. The septic tank(s)must be pumped by alicensed pumper whenever <br /> necessary, usually every 2 to 3 years. <br /> 6. If you have questions concerning your onsite sewage system,contact your local code administrator or the State of <br /> Wisconsin,Safety and Buildings Division, 608-266-3151. <br /> To be complete and accurate this sanitary permit application must include: <br /> I. Property owner's name and mailing address. Provide the legal description and parcel tax number(s)of where the <br /> system is to be installed. <br /> II. Type of building being served. Check only one and complete#of bedrooms if 1 or 2 Family Dwelling. <br /> III. Building use. If building type is public,check all appropriate boxes that apply. <br /> IV. Type of permit. Check only one on line A. Complete line B if permit is for tank replacement,reconnection,or repair. <br /> V. Type of system. Check appropriate box depending on system type. <br /> VI. Absorption system information. Provide all information requested for numbers 1 through 7. <br /> VII. Tank information. Fill in the capacity of every new/or existing tank,list the total gallons,number of tanks and <br /> manufacturer's name, indicate prefab or site constructed and tank material. Complete for all septic,pump/siphon and <br /> holding tanks for this system. Check experimental approval only if tanks received experimental product approval from <br /> DILHR. <br /> VIII. Responsibility statement. Installing plumber is to fill in name, license number with appropriate prefix(e.g. MP,etc.), <br /> address and phone number. Plumber must sign application form. <br /> IX. County/Department Use Only. <br /> X. County/Department Use Only. <br /> Complete plans and specifications not smaller than 8 1/2 x 11 inches must be submitted to tfie county. The plans must <br /> include the following: A) plot plan,drawn to scale or with complete dimensions,location of holding tank(s),septic <br /> tank(s)or other treatment tanks; building sewers; wells; water mains/water service; streams and lakes; pump or siphon <br /> tanks; distribution boxes; soil absorption systems; replacement system areas; and the location of the building served; <br /> B) horizontal and vertical elevation reference points; C) complete specifications for pumps and controls; dose volume; <br /> elevation differences; friction Ipss; pump performance curve; pump model and pump manufacturer; D) cross section <br /> of the soil absorption system if required by the•county;"E) soil test'data on a 115 form; and F)'aIl sizing information. <br /> GROUNDWATER SURCHARGE <br /> 1983 Wisconsin Act 410 included the creation of surcharges(fees)for a number of regulated practices which can <br /> effect groundwater. <br /> The monies collected through these surcharges are used for monitoring groundwater contamination investigations <br /> and establishment of standards. <br />