2023/06/12 - LAND USE - SGN - On-Premise - SGN-23-04

Home Browse Search

• A plot plan drawing is required to be submitted along with this application. The plot plan drawing shall either be drawn with a scale between 1"=20' and 1"=50'by multiples of 10'or FULLY dimensioned. Please note the scale used on the drawing.If all distances are dimensioned a scale is not necessary.The plot plan drawing shall be on letter or lecal size paper with North being at the top of the page. (Make sure all relevant items below are shown—check each relevant box): ❑ Property lines,road right-of-ways,and road centerlines including distances to property lines,road right-of-ways and road centerlines for all existing and proposed signs on the parcel ❑ Ordinary High Water Mark(OHWM)and distances to it from all existing and proposed signs;must show all within 200 ft of signs ❑ Floodplain and wetland areas/boundaries and distances to them from all existing and proposed signs;must show all within 200 ft of signs ❑ Proposed signs and their proposed locations;must show dimensions for ALL items ❑ Distance from proposed sign to nearest road intersection ❑ Distance from proposed sign to road centerline and distance from proposed sign to road right-of-way ❑ Distance from proposed sign to nearest existing off-premise sign in each direction(of=pr•emise applications only) ❑ Existing structures on the parcel including all decks/porches/walkways/etc and including any existing sanitary system,drainfield and wells;must show dimension for ALL items ❑ Heights for all existing and proposed signs *Height is measured from lowest adjacent grade to the highest peak,heights shall not exceed 35 ft. Unique exceptions,such as agricultural buildings and communication structures,may be allowed to exceed the height limit ❑ Existing and proposed driveway(s);must show dimensions and width. *Driveways must have a cleared width of 20 ft and a cleared height of 13 ft ❑ North arrow ❑ Vegetation proposed to be removed or disturbed ❑ Existing and proposed utilities and utility easements ❑ Location and extent of proposed filling/grading ❑ Location and type of erosion control measures ❑ Any other construction related to your project • Construction plans shall be submitted with this application for all items subject to Uniform Building Code or Uniform Sign Code. • Construction plans shall be submitted with this application for all non-dwelling(Commercial/Industrial)related construction. • THIS APPLICATION CONSTITUTES NOTICE THAT ALL IMPROVEMENTS ARE SUBJECT TO ACCESS AND/OR REVIEW BY THE LOCAL MUNICPALITY'S TAX ASSESSOR FOR THE PURPOSE OF TAX ASSESSMENT. • Proposed sign locations must be staked prior to submitting this application to the Land Services Department. County staff will do an onsite visit to verify site conditions. If all proposed structures are not staked upon County staff visit,the permit will NOT be issued and it will be returned to the applicant. • If all existing structures on the parcel are not shown and dimensioned on the plot plan drawing,the permit will NOT be issued and it will be returned to the applicant. Page 2 of 3 Burnett County,WI Sign Application—Rev 12/2022