Laserfiche WebLink
• Well setbacks to meet chs.NR 811 &812,(the new outside perimeter of the planned mound must be>50 ft. from any well). <br /> • Tank Installation to follow all manufacturer's requirements. <br /> • Verify property line(s)prior to installation. <br /> • Pump Floats to be set and verified per the approved plan. <br /> • Provide surface water diversion around the treatment tanks and mound dispersal component. <br /> • Ensure the existing septic tank is watertight,structurally sound and baffles are in place. <br /> • If the force main enters the 15 ft.downslope mound area or downslope area of the mound a 12 inch wide bucket or less must be <br /> utilized. Hand digging is another option. <br /> OWNER RESPONSIBILITIES <br /> • The current owner,and each subsequent owner,shall receive a copy of this letter including instructions relating to proper use <br /> and maintenance of the system. Owners shall receive a copy of the appropriate operation and maintenance manual and/or <br /> owner's manual for the POWTS described in this approval and Wis.Admin.Code§ SPS 383.540). <br /> • In the event this soil absorption system or any of its component parts malfunctions so as to create a health hazard,the property <br /> owner must follow the contingency plan as described in the approved plans. <br /> The submittal described above has been reviewed for conformance with applicable Wisconsin Administrative Codes and Wisconsin <br /> Statutes. The submittal has been CONDITIONALLY APPROVED. This system is to be constructed and located in accordance with <br /> the enclosed approved plans and with any component manual(s)referenced above. The owner,as defined in chapter 101.01(10), <br /> Wisconsin Statutes,is responsible for compliance with all code requirements. <br /> No person may engage in or work at plumbing in the state unless licensed to do so by the Department per s.145.06,stats. <br /> All permits required by the state or the local municipality shall be obtained prior to commencement of <br /> construction/installation/operation. <br /> In granting this approval,the Division of Industry Services reserves the right to require changes or additions,should conditions arise <br /> making them necessary for code compliance. As per state stats 101.12(2),nothing in this review shall relieve the designer of the <br /> responsibility for designing a safe building,structure,or component. The Division does not take responsibility for the design or <br /> construction of the reviewed items. <br /> Inquiries concerning this correspondence may be made to me at the contact information listed below,or at the address on this <br /> letterhead. <br /> Sincerely, Fee Required:$250.00 <br /> Fee Received:$250.00 <br /> -' Balance Due:$0.00 <br /> Refund Expected: $0.00 <br /> Timothy Zoromski <br /> Division of Industry Services <br /> Phone: <br /> Email:timothy.zoromski@wisconsin.gov <br />