2004/12/30 - SANITARY - SAN - Other

Home Browse Search

Safety and Buildings 10541N RANCH ROAD commerce.Wi.gov HAYWARD WI 54843 TDD#:(608)264-8777 tlepartment sconsin www.commerc .wis onsin.govwww.wisconsin.gov of Commerce Jim Doyle,Governor Cory L.Nettles,Secretary August 12,2004 CUST ID No.225851 AM. POWTSInspector RICHARD HOPKINS ZONING OFFICE HOPKINS SAND&GRAVEL BURNETT COUNTY SPIA 27760 HWY 35 7410 CTH K#102 WEBSTER WI 54893 SIREN WI 54872 CONDITIONAL APPROVAL Identification Numbers PLAN APPROVAL EXPIRES: 08/12/2006 Transaction ID No.1027995 SITE: Site ID No.687498 Geraldine Schmugge Please refer to both identification numbers, 11864 Hwy 48 above,in all correspondence with the agency. Town of Trade Lake Burnett County NW1/4,SWI/4,S22,T37N,R18W FOR:Description:Replacement mound,3 bedroom residence Object Type:POWTS Component Manual Regulated Object ID No.:973205 Maintenance required; Replacement system; 450 GPD Flow rate; 36 in Soil minimum depth to limiting factor from original grade; System(s):Mound Component Manual-Version 2.0,SBD-10691-P(N.01101),Pressure Distribution Component Manual-Version 2.0,SBD-10706-P(N.01101) P.O. Candi The submittal described above has been reviewed for conformance with applicable Wisconsin Administrative Codes and Wisconsin Statutes. The submittal has been CONDITIONALLY APPROVED. The owner,as defined in chapter 101.01(10),Wisconsin Statutes,is responsible for compliance with all code requirements. �� DEPART ED No person may engage in or work at plumbing in the state unless licensed to do so by the Department per s.145.06, pl SA stats. The following conditions shall be met during construction or installation and prior to occupancy or use: S�q General Approval Conditions: • This system is to be constructed and located in accordance with the enclosed approved plans and with the design manuals noted above. • In the event this soil absorption system or any of its component parts malfunctions so as to create a health hazard,the property owner must follow the contingency plan as described in the approved plans.In addition, the owner must insure that the operation,maintenance and monitoring duties as described in section VIII of the mound component manual are complied with.A copy of this information must be given to the owner upon completion of the project. Key Item(s) • The designer proposes to install a state approved effluent filter to achieve the requirement of wastewater particle size. Pursuant to outlet filter product approval stipulations,maintenance information must be given to the owner of the POWTS explaining that periodic cleaning of the effluent filter is required. The access opening used to service the filter shall terminate at or above finished grade with a watertight cover. Reminder • The orientation of the mound system must be such that the longest dimension is oriented along the surface contour per COMM 83.44(6)(a)2. • Limit activities in the area 15'beyond the down slope edge of the mound per Mound Component Manual.