2013/10/22 - SANITARY - SAN - Other - 36519

Home Browse Search

WADE A RUFSHOLNI - — Pagc2 9/2712013 • The system was designed to meet the influent quality de0ned in SPS 383.44(2)(a) The quality of influent discharged into a POWTS treatment or dispersal component consisting in pan of in situ soil shall be equal to or less than all of the following: 1.A monthly average of 30 mg/L fats,oil and grease. 2.A monthly average of220 mg/L BOD5. 3.A monthly average of 150 mg/-TSS. • SPS 383.54(3)(6)(b)The servicing frequency of an anaerobic treatment tank for a POWTS shall occur at least when the combined sludge and scum volume equals 1/3 of the tank volume. • The inspection,maintenance and servicing reports shall be submitted to the governmental unit within 30 calendar days from the date of inspection,maintenance and servicing. • The owner is responsible for the operation and maintenance of the private onsite wastewater treatment system (POWTS)in accordance with SPS 383 and the approved management plan • The owner of a POWTS shall be responsible for ensuring that access opening covers remain locked or secured except for inspection,evaluation.maintenance or servicing purposes. • Owners shall receive a copy of the appropriate operation and maintenance manual and/or owners manual for the POWTS described in this approval. • Provide a copy of the approved POWTS plans and this letter to the owner. • Prohibit vehicle traffic and soil disturbance within 15 feet of the downslope edge of the mound pursuant to "Mound Component Manual Version 2.0- SBD-10691-P(N.01/01; R. 10/12). A copy of the approved plans,specifications and this letter shall be on-site during construction and open to inspection by authorized representatives of the Department.which may include local inspectors. All permits required by the state or the local municipality shall be obtained prior to commencement of construction/installation/operation. In granting this approval the Division of Industry Services reserves the right to require changes or additions should conditions arise making them necessary for code compliance.As per state stats 101.12(2),nothing in this review shall relieve the designer of the responsibility for designing a safe building structure,or component. Inquiries concerning this correspondence may be made to me at the telephone number listed below,or at the address on this letterhead The above left addressee shall provide a copy of this letter and the POWTS management plan to the owner and any ,others who are responsible for the installation,operation or maintenance of the POWTS. Sincerely. Fee Required S 250.00 This Amount Will Be That Invoice.��222�� When You Receive That Invoice, F wm A Taylor Please Include a Copy With Your Wastewater Specialist, Integrated Services Papnent Submittal. (715)634-3484, Monday-Friday 8:00 am'To 4:30 pm W SMART code: 7633 edwin.taylor,@wisconsin.gav Note: Effective January 1,2012,all codes under the jurisdiction of the Division of Industry Services(formerly Safety& Buildings)will be modified. Code references with prefixes starting with"Comm" have been replaced with "SPS" to recognize the relocation of the Division of Industry Services from the former Department of Commerce to the Department of Safety& Professional Services.Additionally.all IS(formerly S&B)codes have been renumbered and addressed in a"300"series. For future reference,the Wisconsin Commercial Building Code will be addressed by SPS Chapters 360-366.