Laserfiche WebLink
INSTRUCTIONS <br /> i A sanitary permit is valid for two (2) years. <br /> 2. Your sanitary permit may be renewed before the expiration date: and at the time of renewal any new <br /> criteria in the Wisconsin Admirtstra6ve Code wll' be applicable. <br /> 3 All rcvislons to this permit must be approved by the permit issuing authority. <br /> 4. C� fnges in ownership or plumber requires a Sanitary Permit Transfe NRenewal Form (SBU 6399) to be <br /> submitted to the county prior to installation <br /> Onsite sewage systems must be properly maintained- The septic tank(s) must be pumped by a licensed <br /> pompe: whenever necessar, , usually every 2 to yoars <br /> 6. if you have questions concerning your onsite sewage system, contact your local code administrator or the <br /> State of Wisconsin, Safety 8 Buildings Division, 608266-3815. <br /> To be complete and accurate this sanitary permit application must include. <br /> Property owne, s name and math-, address. Provir!e the legal description and parcei tax numbers) of <br /> where the system is to be installed <br /> ii Type of building being served. Check only one and complete # of bedrooms if 1 or 2 Tamil, Dwelling. <br /> !ll. Building use. !f building type is Public, check all appropriate boxes that apply. <br /> IV. Type of permit. Check only one in line A. Complete line B if permit is for tank replacement, reconnection, or <br /> repair. <br /> 'J. Type of system. Check appropriate box depending or. system type. <br /> VI. Absorption system information. Provide all information requested in #1-7. <br /> VII. Tank information. Fill in the capacity of every new and/or existing tank, list the total gallons, number ui <br /> tanks and manufacturer's name. Indicate prefab or site constructed and tank material. Complete for a4 <br /> septic, pump/siphon and holding tanks for this system Check experimental approval only if tanks received <br /> experimental product approval from DILHR. <br /> VIII. Responsibility statement. Installing plumber is to fill in name, license number with appropriate prefix (e.g. <br /> MP, etc.), address and phone number. Plumber must sign application form. <br /> IX. County/Department Use Only. <br /> X. County/Department Use Only. <br /> Complete plans and specifications not smaller than W6 x 11 inches must be submitted to the county. The <br /> plans must include the following: A) plot plan, drawn to scale or with complete dimensions, location of <br /> holding tank(s), septic tank(s) or other treatment tanks; building sewers; wells; water mains/water service; <br /> streams and lakes, pump or siphon tanks; distribution boxes; soil absorption systems; replacement system <br /> areas; and the location of the building served; B) horizontal and vertical elevation reference points; <br /> C) complete specifications for pumps and controls; dose volume; elevation differences; friction loss; pump <br /> performance curve; pump model and pump manufacturer; D) cross section of the soil absorption system if <br /> required by the county; E) soil test data on a 115 form; and F) all sizing information. <br /> -------------------------------------------------------------------------------------------------------------------------------------------------- <br /> GROUNDWATER SURCHARGE <br /> 1983 Wisconsin Act 410 included the creation of surcharges (fees) for a number of <br /> regulated practices which can effect groundwater. <br /> The monies collected through these surcharges are used for monitoring groundwater, ground- <br /> water contamination investigations and establishment of standards. <br /> SBD-6398(R.11/88) <br />