2012/06/26 - SANITARY - SAN - Other

Home Browse Search

RICHARD HOPKINS Page 2 6/19/2012 • The orientation of the mound system must be such that the longest dimension is oriented along the surface contour per SPS 383.44(6)(a)2. • Limit activities in the area 15'beyond the down slope edge of the mound per Mound Component Manual. • Surface water drainage shall be diverted away from the system area per Mound Component Manual. • Materials shall conform to the requirements of SPS 384.10.No fixture, appliance, appurtenance,material, device or product may be sold for use in a plumbing system or may be installed in a plumbing system,unless it is of a type conforming to the standards or specifications of chs. SPS 382 and 383 and this chapter and ch. 145, Stats. • Maintain well and waterline set backs per SPS 383.43(8)(i).Consult the Department of Natural Resources for well setbacks and other regulations and exceptions. A copy of the approved plans, specifications and this letter shall be on-site during construction and open to inspection by authorized representatives of the Department,which may include local inspectors. All permits required by the state or the local municipality shall be obtained prior to commencement of construction/installation/operation. In granting this approval the Division of Safety&Buildings reserves the right to require changes or additions should conditions arise making them necessary for code compliance.As per state stats 101.12(2),nothing in this review shall relieve the designer of the responsibility for designing a safe building,structure,or component. Inquiries concerning this correspondence may be made to me at the telephone number listed below,or at the address on this letterhead. The above left addressee shall provide a copy of this letter and the POWTS management plan to the owner and any others who are responsible for the installation, operation or maintenance of the POWTS. SincerelyA / / Fee Required$ 250.00 Fee Received$ 250.00 Balance Due $ 0.00 we ,Integrated Services WiSMART code:7633 . (715)634-5150,M-F 8:00 a.m. -4:45 p.m. pat.shandorf@wisconsin.gov cc: Charles L Bratz,POWTS Reviewer II,(608)789-7893 , 7:45 am-4:30 pm Monday-Friday Note: Effective January 1, 2012, all codes under the jurisdiction of the Division of Safety&Buildings will be modified. Code references with prefixes starting with"Comm"will be replaced with"SPS"to recognize the relocation of the Division of Safety&Buildings from the former Dept.of Commerce to the Dept. of Safety& Professional Services.Additionally,all S&B codes will be renumbered and addressed in a"300"series. For future reference,the Wisconsin Commercial Building Code will be addressed by SPS Chapters 360-366.