2015/05/15 - SANITARY - SAN - Other

Home Browse Search

POWTS OWNER'S MANUAL & MANAGEMENT PLAN Page 1 Of FILE INFORMATION SYSTEM SPECIFICATIONS Owner Tank Manufacturer ❑ NA MICHAEL R& KATHLEEN S OLSEN Wieser Concrete Permit# JQ Septic ❑ Dose [] Holding vol. 1000 gal DESIGN PARAMETERS Tank Manufacturer PQ NA Number of Bedrooms 3 ❑ NA ❑ Septic ❑ Dose ❑ Holding vol. gal Number of Public Facility Units W NA Vertical Distance Tank Bottoms)to Service Pad: ft. Estimated (average)flow 300 gal/day Horizontal Distance Tank(s)to Service Pad: ft. Design (peak)flow=(Estimated x 1.5) 450 gal/day Specific servicing mechanics must be provided if vertical is>15 ft.or Soil Application Rateallda /fiz if horizontal is>150 ft. Specific instructions to be provided on back. Standard Influent/Effluent Quality Monthly average Effluent Filter Manufacturer POLYLOK ❑ NA Fats, Oil&Grease (FOG) !cW mg/L Effluent Filter Model PL-525 Biochemical Oxygen Demand (BODs) <_220 mg/L ❑ NA Pump Manufacturer NA Total Suspended Solids (TSS) <150 mg/L Pump Model High Strength InfluenUEffluent Monthly average' Pretreatment Unit Fats, Oil&Grease (FOG) _<30 mg/L Manufacturer ® NA Biochemical Oxygen Demand (BODS) <220 mg/L W NA ❑ Mechanical Aeration ❑ Peat Filter Total Suspended Solids (TSS) <150 mg/L ❑ Disinfection ❑Wetland Pretreated Effluent Quality Monthly average ❑ Sand/Gravel Filter ❑ Other: Biochemical Oxygen Demand (BODS) <_30 mg/L Soil Absorption System ❑ NA Total Suspended Solids (TSS) <30 mg/L NA [X In-Ground(gravity) ❑ In-Ground(pressurized) Fecal Coliform (geometric mean) <10"Cfu/t00m1 ❑At-Grade ❑ Mound Maximum Effluent Particle Size 'X in dia. ❑ NA ❑ Drip-Line ❑ Other: Other: Other: ❑ NA ❑ NA MAINTENANCE SCHEDULE Service Event Service Frequency Inspect condition of tank(s) At least once every: 3 ®❑ month(s)ears (Maximum 3 years) ❑ NA Pump out contents of tank(s) ®When combined sludge and scum equals one-third(36)of tank volume [I NA ❑When the high water alarm is activated Inspect cell (s)dispersal s At least once eve C1 year(s) p ( ) every: 3 year(s) (Maximum 3 years) C3 NA Clean effluent filter At least once eve ❑month(s) ry 3 years) or as needed ❑ NA Inspect pump, pump controls&alarm At least once every: ❑ month(s) El NA C1 year(s) Flush laterals and pressure test At least once every: ❑month(s) [I NA ❑ ear(s) Other: ❑ month(s) At least once every: ❑year(s) ❑ NA Other: ❑ NA MAINTENANCE INSTRUCTIONS Inspections of tanks and dispersal cells shall be made by an individual carrying one of the following licenses or certifications: Master Plumber; Master Plumber Restricted Sewer; POWTS Inspector; POWTS Maintainer; Septage Servicing Operator (pumper). Tank inspections must include a visual inspection of the tank(s)to identify any missing or broken hardware,identify any cracks or leaks,measure the volume of combined sludge and scum and a check for any back up or ponding of effluent on the ground surface. The dispersal cell(s)shall be visually inspected to check the effluent levels in the observation pipes and to check for any ponding of effluent on the ground surface. The ponding of effluent on the ground surface may indicate a failing condition and requires the immediate notification of the local regulatory authority. When the combined accumulation of sludge and scum in any treatment tank equals one-third (Y,) or more of the tank volume, the entire contents of the tank shall be removed by a Septage Servicing Operator and disposed of in accordance with chapter NR 113,Wisconsin Administrative Code. All other services,including but not limited to the servicing of effluent filters,mechanical or pressurized components,pretreatment units,and any servicing at intervals of s12 months,shall be performed by a certified POWTS Maintainer. A service report shall be provided to the local regulatory authority within 30 days of completion of any service event. (rev. 12/12)