2002/01/18 - SANITARY - SAN - Other

Home Browse Search

POWTS OWNER'S MANUAL U MANAGEMENT PLAN Page Lofr-D FILE INFORMATION SYSTEM SPECIFICATIONS Owner -Svw) Septic Tank Capacity /RS-0 gal ❑ Np Permit# Septic Tank Manufacturer xS' ❑ NA DESIGN PARAMETERS Effluent Filter Manufacturer _L ❑ NA Number of Bedrooms ❑ NA. Effluent Filter Model 41oo ❑ NA Number of Commercial Units NA Pump Tank Capacity gal J*°NA Estimated flow (average) 1160 gal/day Pump Tank Manufacturer f NA Design flow (peak), (Estimated x 1.5) ,60 gal/day pump Manufacturer XNA Soil Application Rate "oZ- gal/day/ft' Pump Model ANA Influent/Effluent Quality Monthly average* Pretreatment Unit gNA Fats, Oil ez Grease (FOG) s30 mg/L ❑ Sand/Gravel Filter ❑ Peat Filter Biochemical Oxygen Demand (BODS) 5220 mg/L ❑ Mechanical Aeration ❑ Wetland Total Suspended Solids (TSS) s150 mg/L ❑ Disinfection El Other: Pretreated Effluent Quality NA Monthly average** Manufacturer Dispersal Cell(s) Biochemical Oxygen Demand (BODS) <30 mg/L K In-ground (gravity) ❑ In-ground (pressurized) Total Suspended Solids (TSS) 530 mg/L ❑ At-grade ❑ Mound Fecal Coliform (geometric mean) 510' cfu/I00ml O Drip-line ❑ Other: Maximum Effluent Particle Size A inch diameter * Values typical for domestic (non-commercial)wastewater and septic tank effluent. ** Values typical for pretreated wastewater. MAINTENANCE SCHEDULE Service Event Service Frequency Inspect condition of tank(s) At least once every 3 ❑ months year(s) (Maximum 3 yrs.) Pump out contents of tank(s) When combined sludge and scum equals one-third (h) of tank volume Inspect dispersal cell(s) At least once every ❑ months Jif year(s) (Maximum 3 yrs.) Clean effluent filter At least once every ❑ months g year(s)OAS NEC p -o Inspect pump, pump controls at.alamt At least once every ❑ months ❑ year(s) J NA Flush laterals and pressure test At least once every ❑ months ❑ year(s) V<NA Other: At least once every ❑ months ❑ year(s) ❑ NA Other: At least once every ❑ months ❑ year(s) [INA MAINTENANCE INSTRUCTIONS Inspections of tanks and dispersal cells shall be made by an individual carrying one of the following licenses or certifications: Maste Plumber, Master Plumber Restricted Sewer, POWTS Inspector, POWTS Maintainer; Septage Servicing Operator. Tank inspections must Include a visual Inspection of the tank(s) to identify any missing or broken hardware, identify any cracks or leaks, measure the volume of combined sludge and scum and to check for any back up or ponding of effluent on the ground surface. The dispersal cell(s) shall be visually inspected to check the effluent levels in the observation pipes and to check for any ponding of effluent on the ground surface. The ponding of effluent on the ground surface may indicate a failing condition and requires the immediate notification of the local regulatory authority. When the combined accumulation of sludge and scum in any tank equals one-third (i4) or more of the tank volume, the entire contents of the tank shall be removed by a Septage Servicing Operator and disposed of in accordance with ch. NR 113, Wisconsin Administrative Code. The servicing of effluent filters, mechanical or pressurized POWTS components, pretreatement components, and any other maintenance or monitoring at Intervals of 12 months or less shall be performed by a certified POWTS Maintainer. A service report shall be provided to the local regulatory authority within 10 days of completion of any service event. START UP AND OPERATION For new construction, prior to use of the POWTS check treatment tank(s) for the presence of painting products or other chemical! that may Impede the treatment process and/or damage the dispersal cell(s). If high concentrations are detected have the contents -f't-p t-nblc) romrnipri by i contaop contirinv nnoratnr nrinr to imp