2006/01/18 - SANITARY - SAN - Other

Home Browse Search

POINTS OWNER'S MANUAL U MANAGEMENT PLAN Page l Ofo FILE INFORMATION SYSTEM SPECIFICATIONS _ Owner 'my I Septic Tank Capacity 7sV gal ❑ NA Permit# t 7Pr 2_,i Septic Tank Manufacturer l) /F'_VFJ( ❑ NA DESIGN PARAMETERS Effluent Filter Manufacturer Pot Lo ❑ NA Number of Bedrooms a 0 NA- Effluent Filter Model L_ a5 ❑ NA Number of Commercial Units ZONA Pump Tank Capacity gal NA Estimated flow (average) a0C} gal/day Pump Tank Manufacturer 6e NA Design flow (peak), (Estimated x 1.5) 3O0 gal/day Pump Manufacturer Ji NA Soil Application Rate 0. -7 gal/day/ft' Pump Model ILNA Influent/Effluent Quality Monthly average* Pretreatment Unit X_NA Fats, Oil 8E Grease (FOG) 530 mg/L ❑ Sand/Gravel Filter ❑ Peat Filter Biochemical Oxygen Demand (BODS) 5220 mg/L 1:3 Mechanical Aeration 11 Wetland Total Suspended Solids (TSS) :5 150 mg/L ❑ Disinfection 13 Other: Manufacturer Pretreated Effluent Quality )I NA Monthly average** Dispersal Cell(s) Biochemical Oxygen Demand (BODS) 530 mg/L A In-ground (gravity) ❑ In-ground (pressurized) Total Suspended Solids (TSS) 530 mg/L ❑ At-grade ❑ Mound Fecal Coliform (geometric mean) <104 cfu/100m1 1 ❑ Drip-line ❑ Other: Maximum Effluent Particle Size k inch diameter * Values typical for domestic (non-commercial)wastewater and septic tank effluent. ** Values typical for pretreated wastewater. MAINTENANCE SCHEDULE Service Event Service Frequency Inspect condition of tank(s) At least once every 3 ❑ months year(s) (Maximum 3 yrs.) Pump out contents of tank(s) When combined sludge and scum equals one-third ('h) of tank volume Inspect dispersal cell(s) At least once every 3 ❑ months 2 year(s) (Maximum 3 yrs.) Clean effluent filter At least once every 3 ❑ months I@ year(s) OR 4 lytF_Ar-D Inspect pump, pump controls 8t:alarm At least once every ❑ months ❑ year(s) ANA Flush laterals and pressure test At least once every ❑ months ❑ year(s) JQ NA Other: At least once every ❑ months ❑ year(s) ❑ NA Other: At least once every ❑ months ❑ year(s) ❑ NA MAINTENANCE INSTRUCTIONS Inspections of tanks and dispersal cells shall be made by an individual carrying one of the following licenses or certifications: Master Plumber, Master Plumber Restricted Sewer, POINTS Inspector, POWTS Maintainer; Septage Servicing Operator. Tank inspections must Include a visual Inspection of the tank(s) to Identify any missing or broken hardware, identify any cracks or leaks, measure the volume of combined sludge and scum and to check for any back up or ponding of effluent on the ground surface. The dispersal cell(s) shall be visually Inspected to check the effluent levels in the observation pipes and to check for any ponding of effluent on the ground surface. The ponding of effluent on the ground surface may indicate a failing condition and requires the immediate notification of the local regulatory authority. When the combined accumulation of sludge and scum in any tank equals one-third ('h) or more of the tank volume, the enure contents of the tank shall be removed by a Septage Servicing Operator and disposed of in accordance with ch. NR 113, Wisconsin Administrative Code. The servicing of effluent filters, mechanical or pressurized POWTS components, pretreatement components, and any other maintenance or monitoring at intervals of 12 months or less shall be performed by a certifled POWTS Maintainer. A service report shall be provided to the local regulatory authority within 10 days of completion of any service event. START UP AND OPERATION For new construction, prior to use of the POWTS check treatment tank(s) for the presence of painting products or other chemicals that may impede the treatment process and/or damage the dispersal cell(s). If high concentrations are detected have the contents ,F-t•o 1onlr(0 rommvpA by i confaoo cpnririno nnprntnr nrinr fn mp