Laserfiche WebLink
A plot plan drawing is required to be submitted along with this application. Plot plan shall be drawn with a scale preferably at <br /> 1"=20' or multiples of 10'. Scale shall not exceed 1"=50'. Note the scale used on the drawing. Plot plan drawing shall be on letter, <br /> legal or ledger size paper with North being at the top of the page. Make sure all items below are shown—check each box <br /> Property lines, road right-of-ways,and road centerlines including distances to property lines,road right-of-ways and road <br /> centerlines for all existing and proposed signs on the parcel <br /> NA ❑ Ordinary High Water Mark(OHWM)and distances to it from all existing and proposed signs;must show all within 200 ft of signs <br /> Nr� ❑ Floodplain and wetland areas/boundaries and distances to them from all existing and proposed signs;must show all within 200 ft of <br /> signs <br /> f� Proposed signs and their proposed locations; must show dimensions for ALL items <br /> Distance from proposed sign to nearest road intersection <br /> Distance from proposed sign to road centerline and distance from proposed sign to road right-of-way <br /> j4k❑ Distance from proposed sign to nearest existing off-premise sign in each direction(off-prernise applications only) <br /> Existing structures on the parcel including all decks/porches/walkways/etc and including any existing sanitary system, drainfield <br /> and wells; must show dimension for ALL items <br /> Heights for all existing and proposed signs *Height is measured from lowest adjacent grade to the highest peak,heights shall not <br /> exceed 35 ft. Unique exceptions, such as agricultural buildings and communication structures,may be allowed to exceed the height <br /> limit <br /> Existing and proposed driveway(s);must show dimensions and width. *Driveways must have a cleared width of 20 ft and a cleared <br /> height of 13 ft <br /> North arrow <br /> Vegetation proposed to be removed or disturbed <br /> ❑ Existing and proposed utilities and utility easements <br /> ❑ Location and extent of proposed filling/grading <br /> ❑ Location and type of erosion control measures <br /> Any other construction related to your project <br /> • Construction plans shall be submitted with this application for all items subject to Uniform Building Code or Uniform Sign <br /> Code. <br /> • Construction plans shall be submitted with this application for all non-dwelling(Commercial/Industrial)related <br /> construction. <br /> • Proposed sign locations must be staked prior to submitting this application to the Zoning Office. County staff will do an <br /> onsite visit to verify site conditions. If all proposed structures are not staked upon County staff visit, the permit will NOT <br /> be issued and it will be returned to the applicant. <br /> • If all existing structures on the parcel are not shown and dimensioned on the plot plan drawing,the permit will NOT be <br /> issued and it will be returned to the applicant. <br /> Page 2 of 4 <br /> Barnett County, WI Sign Application —Rev 3/2015 <br />