2016/03/17 - SANITARY - SAN - Other (3)

Home Browse Search

WADE A RUFSHOLM Page 2 3/11/2016 ` • Care must be taken to preserve the bench mark during construction or reestablished prior to plowing. • The force main is to be installed in the downslope area(see plot plan).The trench for the force main may not be wider than 12 inches per Mound Component Manual. Reminder • The orientation of the mound system must be such that the longest dimension is oriented along the surface contour per SPS 383.44(6)(a)2. • Limit activities in the area 15'beyond the down slope edge of the mound per Mound Component Manual. • Surface water drainage shall be diverted away from the system area per Mound Component Manual. • Materials shall conform to the requirements of SPS 384. • Maintain well and waterline set backs per SPS 383.43(8)(1). Consult the Department of Natural Resources for well setbacks and other regulations and exceptions. The POWTS must be 250' from any well on this site. • Anchor tank as necessary to negate buoyant forces per SPS 383.43(8)(g). • Insulate building sewer per SPS 382.30(11)(c). • Provide frost protection per SPS 383.43(8)(c). A copy of the approved plans, specifications and this letter shall be on-site during construction and open to inspection by authorized representatives of the Department,which may include local inspectors. All permits required by the state or the local municipality shall be obtained prior to commencement of construction/installation/operation. In granting this approval the Division of Industry Services reserves the right to require changes or additions should conditions arise making them necessary for code compliance. As per state stats 101.12(2),nothing in this review shall relieve the designer of the responsibility for designing a safe building, structure,or component. Inquiries concerning this correspondence may be made to me at the telephone number listed below,or at the address on this letterhead. The above left addressee shall provide a copy of this letter and the POWTS management plan to the owner and any others who are responsible for the installation,operation or maintenance of the POWTS. Sincerely, Fee Required S 400.00 This Amount Will Be Invoiced. When You Receive That Invoice, Please Include a Copy With Your Patricia L Shandorf Payment Submittal. POWTS Plan Reviewer,Division of Industry Services WiSMART code:7633 (715)634-7810, Fax: (715)634-5150 ,M-F 8:00 a.m. -4:45 p.m. pat.shandorf@wisconsin.gov cc: Edwin A Taylor, Wastewater Specialist,(715)634-3484 ,Monday-Friday 8:00 am To 4:30 pm