Laserfiche WebLink
A plot plan drawing is required to be submitted along with this application. The plot plan drawing shall either be drawn with a <br />scale between 1"= 20' and 1"= 50' by multiples of 10' or FULLY dimensioned. Please note the scale used on the drawing. If all <br />distances are dimensioned a scale is not necessary. The plot plan drawing shall be on letter or legal size paper with North being <br />at the top of the page. (Make sure all relevant items below are shown — check each relevant box): <br />❑ Property lines, road right-of-ways, and road centerlines including distances to property lines, road right-of-ways and road <br />centerlines for all existing and proposed signs on the parcel <br />❑ Ordinary High Water Mark (OHWM) and distances to it from all existing and proposed signs; must show all within 200 ft of signs <br />❑ Floodplain and wetland areas/boundaries and distances to them from all existing and proposed signs; must show all within 200 ft of <br />signs <br />❑ Proposed signs and their proposed locations; must show dimensions for ALL items <br />❑ Distance from proposed sign to nearest road intersection <br />❑ Distance from proposed sign to road centerline and distance from proposed sign to road right-of-way <br />❑ Distance from proposed sign to nearest existing off -premise sign in each direction (off -premise applications only) <br />❑ Existing structures on the parcel including all decks/porches/walkways/etc and including any existing sanitary system, drainfield <br />and wells; must show dimension for ALL items <br />❑ Heights for all existing and proposed signs *Height is measured from lowest adjacent grade to the highest peak, heights shall not <br />exceed 35 ft. Unique exceptions, such as agricultural buildings and communication structures, may be allowed to exceed the height <br />limit <br />❑ Existing and proposed driveway(s); must show dimensions and width. *Driveways must have a cleared width of 20 ft and a cleared <br />height of 13 ft <br />❑ North arrow <br />❑ Vegetation proposed to be removed or disturbed <br />❑ Existing and proposed utilities and utility easements <br />❑ Location and extent of proposed filling/grading <br />❑ Location and type of erosion control measures <br />❑ Any other construction related to your project <br />• Construction plans shall be submitted with this application for all items subject to Uniform Building Code or Uniform Sign <br />Code. <br />• Construction plans shall be submitted with this application for all non -dwelling (Commercial/Industrial) related <br />construction. <br />• THIS APPLICATION CONSTITUTES NOTICE THAT ALL IMPROVEMENTS ARE SUBJECT TO ACCESS AND/OR <br />REVIEW BY THE LOCAL MUNICPALITY'S TAX ASSESSOR FOR THE PURPOSE OF TAX ASSESSMENT. <br />• Proposed sign locations must be staked prior to submitting this application to the Land Services Department. County staff <br />will do an onsite visit to verify site conditions. If all proposed structures are not staked upon County staff visit, the permit <br />will NOT be issued and it will be returned to the applicant. <br />• If all existing structures on the parcel are not shown and dimensioned on the plot plan drawing, the permit will NOT be <br />issued and it will be returned to the applicant. <br />Page 2 of 3 <br />Burnett County, WI Sign Application — Rev 3/2018 <br />