My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2019/07/11 - SANITARY - SAN - Repl Mound >24" - SAN-19-16
Burnett-County
>
Property Files
>
TOWN OF SCOTT
>
18462
>
2019/07/11 - SANITARY - SAN - Repl Mound >24" - SAN-19-16
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
3/6/2020 8:45:04 AM
Creation date
7/11/2019 12:34:55 PM
Metadata
Fields
Template:
Property Files v2
Document Date
7/11/2019
Document Type 1
SANITARY
Document Type 2
SAN
Document Type 3
Repl Mound >24"
County Permit Number
SAN-19-16
State Permit Number
614855
Tax ID
18462
Pin Number
07-028-2-40-14-24-5 05-003-013000
Legacy Pin
028412403400
Municipality
TOWN OF SCOTT
Owner Name
JAY HOPPE
Property Address
1221 COUNTY RD E
City
SPOONER
State
WI
Zip
54801
Previous Owners
JAY HOPPE
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
18
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
July 21, 2016 <br />CUST ID No. 227691 <br />WADE A RUFSHOLM <br />24702 LIND RD <br />PO BOX 514 <br />SIREN WI 54872-0514 <br />CONDITIONAL APPROVAL <br />PLAN APPROVAL EXPIRES: 07/21/2018 <br />SITE: <br />Jay Hoppe <br />1221 Cty E <br />Town of Scott <br />Burnett County <br />Government Lot(S) 3, S24, T40N, R14W <br />DIVISION OF INDUSTRY SERVICES <br />10541 N RANCH RD <br />HAYWARD WI 54843-6462 <br />Contact Through Relay <br />http://dsps.wi.gov/programs/industry-services <br />www.wisconsin.gov <br />Scott Walker, Governor <br />Dave Ross, Secretary <br />ATTN.• POWTS Inspector <br />ZONING OFFICE <br />BURNETT COUNTY SPIA <br />7410 CTH K # 102 <br />SIREN WI 54872 <br />Identification Numbers <br />Transaction ID No. 2733584 <br />Site ID No. 826293 <br />Please refer to both identification numbers, <br />above, in all correspondence with the agency. <br />FOR: <br />Description: Mound, 3 bedroom residence <br />Object Type: POWTS Component Manual Regulated Object ID No.: 1611878 <br />Maintenance required; Replacement system; 450 GPD Flow rate; 27 in Soil minimum depth to limiting factor from <br />original grade; System(s): Mound Component Manual - Ver. 2.0, SBD-10691-P (N.01/01, R. 10/12), Pressure <br />Distribution Component Manual - Ver. 2.0, SBD-10706-P (N.01/01, R. 10/12), SSWMP Pub. 9.6; Effluent Filter <br />CON <br />DEPT , <br />PROFEc <br />The submittal described above has been reviewed for conformance with applicable Wisconsin Administrative Codes DINASIOS O <br />and Wisconsin Statutes. The submittal has been CONDITIONALLY APPROVED. This system is to be constructed <br />and located in accordance with the enclosed approved plans and with any component manual(s) referenced above. <br />The owner, as defined in chapter 101.01(10), Wisconsin Statutes, is responsible for compliance with all code <br />requirements. <br />No person may engage in or work at plumbing in the state unless licensed to do so by the Department per s.145.06, <br />stats. <br />The following conditions shall be met during construction or installation and prior to occupancy or use: <br />Key Item(s) <br />• In the event this soil absorption system or any of its component parts malfunctions so as to create a health <br />hazard, the property owner must follow the contingency plan as described in the approved plans. In addition, the <br />owner must insure that the operation, maintenance and monitoring duties as described in section VIII of the <br />mound component manual are complied with. A copy of this information must be given to the owner upon <br />completion of the project. <br />Reminder <br />• The orientation of the mound system must be such that the longest dimension is oriented along the surface <br />contour per SPS 383.44(6)(a)2. <br />• Limit activities in the area 15' beyond the down slope edge of the mound per Mound Component Manual. <br />• Surface water drainage shall be diverted away from the system area per Mound Component Manual. <br />• Materials shall conform to the requirements of SPS 384. <br />• The existing POWTS must be properly abandoned per s. SPS 383.33 Wis. Adm. Code. <br />
The URL can be used to link to this page
Your browser does not support the video tag.