Laserfiche WebLink
PAGE 3OF4 <br /> HOLDING TANK SPECIFICATIONS <br /> (No Scale) <br /> 30 Weatherproof 12"Min.or 2.0 ft above <br /> Junction and Approved Established Flood Elevation <br /> Alarm Box Vent Cap (typical) <br /> Electrical must comply with Approved Locking Manhole <br /> SPS 316 and NEC 300 4"0 Vent Pipe with Warning Label Attached <br /> Conduit >10 ft from (typical) 4"Min.or 2.0 ft above <br /> Building I Established Flood Elevation <br /> i (typical) <br /> Airtight Seal _ <br /> } e Finished Grade <br /> 18"Min. <br /> (typical) <br /> ° 8 . <br /> Inlet Inlet Invert <br /> ---Watertight <br /> Approved Joints with Plug <br /> Approved Pipe 3 ft onto Max. 12"or 90%of total volume <br /> Solid Ground if more than one tank <br /> a <br /> Alarm-On <br /> e <br /> n <br /> HOLDING TANK <br /> VOLUME = gal <br /> 3"Approved Bedding Material Beneath Tank <br /> TANK MANUFACTURER: <br /> Anchor tank as necessary <br /> pursuant to SPS 383.43(8)(g) <br /> Ballast Weight= [(cu.ft.tank.vol x 62.4 Ibs/cu.ft)- Ibs.tank.wt]x 1.5 <br /> Ballast Weight= [( k)R cu.ft. x 62.4 Ibs/cu.ft)- 1)A� Ibs]x 1.5 = _Ibs <br />