2011/08/31 - SANITARY - SAN - Repl Mound <24" - 55192

Home Browse Search

• Safety and Buildings 10541N RANCH ROAD commerce.wi.gov • HAYWARD W1 54843 tsconsin TDD#:(608)264-8777 www.commerce.wi.govlsb! www.wisconsin.gov epartment of Commerce • Jim Doyle,Governor Mary P.Burke,Secretary August 29,2007 CUST ID No. 227691 ATTNV:POWTS Inspector WADE A RUFSHOLM ZONING OFFICE 24702 LIND RD BURNETT COUNTY SPLA PO BOX 514 7410 CTH K#102 SIREN WI 54372 SIREN WI 54872 CONDITIONAL APPROVAi, Identification Numbers PLAN APPROVAL EXPIRES:08/29/2009 Transaction ID No. 1433337 SITE: Site ID No. 729446 Rick LefTelman Please refer to both identification numbers, Spook Dr above, in all correspondence with the agency. Town of Trade Lake Burnett County N W 114,NE 1/4,S16,T37N,R 18 W FOR: P Description: Mound,2 bedroom residence CO1LA Object Type: POWTS Component Manual Regulated Object ID No.: 1148526 Mil Maintenance required; 300 GPD Flow rate; 18 in Soil minimum depth to limiting factor from original grade; • System(s):Mound Component Manual-Version 2.0,SBD-10691-P(N.O1/01),SSWMP Pub.9.6 =' orir The submittal described above has been reviewed for conformance with applicable Wisconsin Administrative Codes and Wisconsin Statutes. The submittal has been CONDITIONALLY APPROVED, This system is to be constructed and located in accordance with the enclosed approved plans and with the component manual(s) referenced above.The owner,as defined in chapter 101.01(10),Wisconsin Statutes, is responsible for compliance with all code requirements. No person may engage in or work at plumbing in the state unless licensed to do so by the Department per s.145.06, stats. The following conditions shall be met during construction or installation and prior to occupancy or use: Key Item(s) • In the event this soil absorption system or any of its component parts malfunctions so as to create a health hazard,the property owner must follow the contingency plan as described in the approved plans. In addition, the owner must insure that the operation,maintenance and monitoring duties as described in section VIII of the mound component manual are complied with.A copy of this information must be given to the owner upon completion of the project. -• The designer proposes to install a state approved effluent filter to achieve the requirement of wastewater particle size. Pursuant to outlet filter product approval stipulations,maintenance information must be given to the owner of the POWTS explaining that periodic cleaning of the effluent filter is required. The access opening used to service the filter shall terminate at or above finished grade with a watertight cover. Reminder • The orientation of the mound system must be such that the longest dimension is oriented along the surface contour per COMM 83.44(6)(a)2. • Limit activities in the area 15' beyond the down slope edge of the mound per Mound Component Manual. • Surface water drainage shall be diverted away from the system area per Mound Component Manual.